BIOSPACE BPBIO320 Measuring Blood Pressure Monitor

BIOSPACE BPBIO320 Measuring Blood Pressure Monitor

Product features
1) Automatic Blood Pressure Monitor Measurement Method of applying upward pressure system with high accuracy.
2) The patient's pulse is detected in the patient's blood pressure, the maximum pressure value is adjusted automatically.
3) measured 2 minutes after the automatic energy saving mode and economic functions.
4) measured from start to finish the whole process alone can measure.

Specifications :

• Method of measurement: oscillometric 
• Pressurization method: Speed control air pressurization controller (bottom-up) by the micro-pump, pressurized auto-correction
• How decompression: Microvalve by emission
• Cuff: Pressure on the belt by the way the gear motor, automatic operation
• Measuring range: Pressure: 0 ~ 300 mmHg. Pulse: 30 ~ 240 bpm
• Accuracy: Pressure: ±2 mmHg within. Pulse: within 2%
• Measurement results: High blood pressure, low blood pressure, pulse rate, pulse wave graph, blood pressure evaluation.
• Measurement time: Within 60 seconds (an average of about 30 seconds, depending on the value of the pulse rate and blood pressure)
• Pressurization time: about 10 seconds
• Display Mode: 1mmHg
• Rated Voltage: AC 100-240v, 50-60 Hz, 70VA
• Size: 489x 409x 284 (mm)
• Weight: 9kg (19.84lb)
• Operating environment: temperature 10 ~ 40°C, Humidity 30 ~ 75% RH, barometric pressure, 70 ~ 106kpa.
• Storage Environment: Temperature -20 ~ 70°C, Humidity 10 ~ 95% RH, barometric pressure 50 ~ 106kpa.